LV Anchoring clamp and suspension clamps for service cables

Application

The clamps are designed to anchor LV-ABC lines with insulated neutral messenger. The clamp consists of high quality plastic cast body and self-adjusting plastic wedges which clamp the neutral messenger without damaging its insulation.

The flexible stainless steel bail protected by plastic wear-resistant saddle allows installations of up to 3 clamps on a bracket. The clamp and the bracket are available either separately or together as assembly.

Features

• Tool free installation
• Not lose parts
• Exceeds requirements according to EN 50483-3 and NFC 33 041
• Clamp body made of corrosion resistant high quality PA66, bail of stainless steel, wedges of weather and UV resistant polymer • Universal fixing of bracket by 2 bolts M14 or stainless steel straps of 20 x 0.7 mm.
• Bracket made of corrosion resistant aluminium alloy
• Maximum line deviation angles of 50° for single and 100° for double anchoring:

Technical specification

Dimensions
Code	Cable Size	Breaking Load	Weight
PA1500	25-50mm²	6kN	420g
PA2000	54.6-70mm²	8kN	580g
Specification
Use:	For dead-ending of cables with round shape.
Construction
Component	Material
Body and Wedge	Weather and UV-radiation resistant thermoplastic
Bail Set	Stainless Steel 201
Installation:	The clamp is opened and the messenger wire is inserted between the wedge and the body. The clamp is then closed and strained.
Standard	NFC 33-042; EN 50-483

Model	Coss-section (mm2)
STA	1×10/1×16
STB	2×16/2×25
STC	4×16/4×25
STD	1×16/1×70
LA1	4×16/4×25
LA2	2×6/2×16
DCR-1	1×4/1×25
DCR-2	1×4/1×25
2.1	16-25
PA1500	25-50
PA2000	54.6-70